April 11, 2023 4 min read
Whenever you invest in a grill, you should know that an auger is perhaps one of the most important components. That is because the main purpose of this component is to remove the pellets from the hopper and into the firepot. If it gets jammed, it can lead to the failure of the auger motor.
Because of this, it is crucial to understand how to know if the Traeger auger is jammed. Various signs will indicate this is the case. Here is what you must know about it.
Here are some signs you need to look out for to understand whether the Traeger auger is jammed or not:
The first sign that might indicate it is jammed is if there is a lot of dirt. This can happen when there is too much dirt or debris inside the auger, which can hinder it from working or turning. The best way to fix this issue is by turning off your Traeger.
After that, you must thoroughly clean the motor with a soft brush. Once everything is clean, the auger will easily turn. If you want to prevent this issue, make sure you clean the auger occasionally after using the traeger grill.
Another reason might be that the tube of the auger is jammed or clogged. When this happens, the auger will not turn, and you will have to see why there is a clog. Most of the time, it is clogged because of the collection of debris.
Other times, there might be other reasons for the issue. First, you must check the tube to see what is causing this issue. Then, you can take the relevant steps to fix this problem.
Yes, damage to the auger motor will also prevent it from working. Therefore, you must look at the motor for damage, such as broken spots, cracks, etc. If this happens, you might not have any other choice but to contact the company for a solution.
If your warranty is still left, then the company will fix the issue free of cost. On the other hand, if your warranty has expired, then you will be charged a small amount, depending on the repair. We recommend that you don’t try fixing the motor on your own, as it can lead to more problems if you don’t have technical expertise.
There can be times when the wood pellets can stay stuck inside the auger, which can lead to such problems. Here is what you can do to check the auger for this issue:
You will have to manually take out the pellets if they are stuck inside the auger. Make sure that you take all precautions before you handle the grill in this way. It will enable you to inspect without any trouble.
There are many times when the power source can be faulty, which can lead to the grill and the auger not working properly. So the first thing you need to check when you turn on the grill is if the controller is switched on. If that doesn't happen, it means that the power source is damaged, which is why the auger is not turning.
The reasons could be a damaged cable or poor connection from the source. This is why it is crucial for you to check the power source and electricity before you use your grill.
So, you have checked everything by now, and none of the reasons above are true for the Traeger auger jam you are facing. If that is the case with you, then you might have a broken vacuum switch. When there is too much pressure on the grill, and you use it frequently, then it can cause the vacuum switch to break.
In the long run, this can block airways and cause jams in the auger. The best way to fix this is to check the switch, which doesn't require taking apart the grill. Once you diagnose this problem, you can take steps to fix it.
The shear pin is an important part of the auger that connects the auger with the motor. You will find this pin located behind the motor. Keep in mind that old models of the grill have a quick-release pin, while the most recent models come with a bolt and nut pin.
If the pin is displaced or it is faulty, then the auger will not turn, and it will stay jammed in one place. You will have to replace it with a better pin and design so that it can suit the needs of your grill. If all else fails, then this might be one of the top reasons why the Traeger auger is jammed and refusing to work for a smooth grilling process.
That was everything you needed to know about how to know if the Traeger auger is jammed. All of these could be the reasons why there is a jam, which is why you can take the relevant steps to ensure that this doesn’t happen. Sometimes, it might not work at all, in which case, you will have to call the company.
They will assist you with this and guarantee that the auger of the grill begins working in no time. In some cases, a replacement is the only solution that will make sense and provide you with a new auger that will fulfill its function with ease for a long time.
Sign up to get the latest on sales, new releases and more …